Claire Corlett

Fish Food, Fish Tanks, and More
DIY Aquarium Caves,Fish Caves, Pleco Caves, Dwarf Cichlid Caves. Homemade and Easy.

DIY Aquarium Caves,Fish Caves, Pleco Caves, Dwarf Cichlid Caves. Homemade and Easy.

– Hey, guys. This is Cory from Aquarium Co-op. Today, I’m gonna show you how to make some caves out of flower pots. So, we’re going to take
a normal flower pot, and we’re gonna show you
how to drill a hole into it. And we’re gonna attach some plants to it and things like that. Stay tuned. Here, we’ve got some caves. This is a cichlid stone
cave, something like that. They’re anywhere from six to 15 dollars, depending on the size, stuff like that. This is a cobalt cichlid cave. You can buy them at a lot
of independent retailers and probably online, too. These are probably eight
bucks or something like that, I don’t know, 10. And then we have a flower pot, you know? You can just put it in an aquarium and have a big opening like that. But, typically for apistos
and things like that, they want a smaller hole. And, so we’re going to
show you how to do that. So, the first thing you
want to do is soak your pot overnight in a bucket, get ’em real wet. That’s gonna make the
terracotta or the clay easier to drill. Next, your gonna need a hole saw. And I own a kit, so I can
choose lots of the sizes. I can see here, I’ve actually
done one of this size and made a pretty large hole, and that’s what is over
here in the fish room for this cave right here. And you see how that
one went right through. It was easy. So, this time, we’re
gonna do a real small one. And I’m gonna show you
what that process is like, and then we’re gonna
use some Super Glue Gel, which you’ve probably
seen in another video. And we’re gonna attach some plants. I’ve got some bucephalandra
and some anubias that we’re gonna attach. So we’re gonna make two of these today. All right, so I’ve chosen
my hole saw I wanna use. I’ve got my cordless drill here. This is 1 and 1/8, and
what you really want, to make this easy, is you want the drill
bit to be inside of here. It’s the pilot bit. You can get them that don’t have that, but it’s really gonna want to jump around. As you’re trying to get
the hole started on here, it’s gonna want to move around a lot. So, the other thing I recommend is having a bucket of water like this because this bit will get
hot, and it’ll actually start creating steam if
we don’t keep it cool. It’s like drilling glass
or anything like that. So, what we’re gonna do is we’re gonna pick a spot on here, and then I’m gonna drill it. And I’m gonna, you know, I’ve got the tripod here and the camera kinda at a weird angle. This will be much harder
to do showing on a camera than it would be without
having to work with equipment, so, whatever you see here, it’s gonna be easier for you to do. But, we’re basically,
we’ve got the water level just so it comes up to
the rim of this pot here. So this water is gonna
cool the bit as we drill. It’s gonna help carry away
some of the terracotta that we’re cutting away, and we’re just gonna get started here. So, we’re gonna get the pilot bit going, and I’m gonna hold it here. (drill whirrs slowly) So we’re drilling. I would say, go at a slow pace, definitely while you’re getting
the pilot bit through it. You don’t want to crack it, and you also don’t want to jump
around and make it look bad. So, I’ll stop here and show
you what we’ve done so far, and kinda clean it up. So far, all there is is a little notch here. All right, so we’ve made it through. And you can see there the
first layer kind of dug in, and what’s gonna happen is, when you’re drilling,
it’s always gonna basically drill heavier
on one side than the other because this pot is tapered, and so it’s our job to kinda even that out as we start going through it, so, once I kinda get this line in, I’m going to rock it to the other side, so it cuts on this side, and
then we’re pretty locked in, and it should go relatively quick. But back in the water it goes. We attach the old drill bit to it, and actually it’s getting low enough that this could be a problem, so I might have to do it out
of the water for the video, and just use a shorter tub
next time I’m doing it. You can really hear the grinding
now that we’re grinding it all the way around. And you can watch it grind it through. And we definitely wanna
just keep it nice and wet. It’s kinda drilling through tile, almost, you definitely want to use lots of water. And if you see any steam
or anything like that, the bit’s getting way too hot, and you don’t want that, so, it’s just a slow and steady process. And we’ll give you a
look from what’s going on on the inside here. So you can see the pilot
bit is through it, you know, and it’s a slow grind through, it’s not a race, but being that it’s wet, it does grind through pretty quick. And, yeah, it’s a slow and steady, shouldn’t take more
than a couple of minutes at most from start to finish. Also, when you keep getting
it wet, you’re clearing out what you’ve ground out, basically. So you can see here, we are now, let me get it angled
right for the camera here. You can see my hand through it, and you can see on the top part here, we’ve actually come all the way through. We’re through up here, but
we’re not on the bottom or the top, whatever way
you’re looking at it. So, when we’re drilling
it, we’re going to apply more pressure to this side than this side. Otherwise, it’s gonna want to crack out, and we would rather cut our way through it than break our way through it. So, back in it goes, and
we’re just gonna lean heavier towards the side that
hasn’t cut through yet. Even though we’re almost through,
we still wanna get it wet. And, just like that, we’re through. Let’s set the drill down here. Clean up our hole. Yeah, so we have a pretty nice hole here. I would say, if I wasn’t
having to do it on a camera, it would be even a nicer hole, but it’s not sharp by any means. That’s the nice thing, ’cause we ground our way through easily. so we shouldn’t have any problem. Nice size hole for, maybe,
apistos or some smaller africans, that type of thing. Plecos can use this as well. But now we want to do the second part of our project here. We don’t need the water
that we’ve made anymore. We’re going to attach a
plant, so let me grab that. All right. So I’m gonna attach, I’ll do this potted anubias barteri, ’cause that’s what I’ve got right here. Take it out of the pot. This one’s been neglected
in a tank, a breeder tank, for a long time, but
it’ll get a better life now that it’s gonna be attached to a pot and a little closer to
light and not neglected. So, we’re pulling all the rockwool off. As kind of a refresher, if you’ve watched the
video on how to do this, the goal is to get all
this excess stuff off. so that we can get the roots, or the rhizome, actually,
is what we really want, and attach that. This takes, you know, a
little bit of time here. And if you have scissors,
you can cut the roots down. The roots are kinda long on this one, so I’m just gonna pull them off here. And these will grow back,
but it makes it easier to attach without all
the roots in the way. Let’s see, I’ll clean my hand here. So now we’ve got very short roots, you know, for the size of plant it is. And we’re gonna dry off with this towel. Also gonna dry, I’m gonna attach to the top of this… top of this pot here. So the nice thing is, a lot of these pots already come with a hole, and some species will like
it with some light coming in, some don’t. The other thing is, you can
kind of glue a plant on here and get it so the roots
want to go down there, so that eventually, you’ve kinda got all these roots coming down, so when the fish go in,
they feel a lot safer ’cause there’s roots
in here, and it’s like it’s a real nice hide for ’em. But yeah, so we’ve got
this dry and this dry. Super Glue Gel, we wanna use gel, not just regular Super Glue
’cause it’s too watery, we wanna use the actual gel. And we’re just going to… put some on our pot here. Yeah, so there’s a lot
of glue right there. I mean, not crazy amount,
but definitely if it was normal Super Glue, it would be too watery. All right, so that’s that. Now my goal is to make it stay in there. I’m gonna try and put some
of this into the hole. So that it will grow. And then, the rest of it, just hold it. All we gotta do is hold
it against the glue there. And if we look at it here,
it’s kinda leaning to the side. It’s gonna train itself to stand up once it’s orientated with
some light on it after a week or two, ’cause this was in a, in the basket, it was
laying over in the tank, and so it was oriented this way, you know, so this pot, as we put it on here, same orientation, it will right itself. And the glue, still wet, but it’s already holding. Use something besides
your finger to make sure you’ve got a good handle on that. But, while that’s drying,
we can do the next one. So, it’s been about five minutes now. I just put the cave in. Glue’s dried. These are some apistogramma panduro. I got ’em from Ted Judy. I also got some of these in the store. But, yeah, she’s already checked
it out a couple of times. And, yeah, they’ve
already build this one up and haven’t laid eggs yet, but I’m hoping it’ll
take to one of these ones that have plants and stuff on it. Here she comes, maybe
she’ll come visit it. They never like it when I’m videoing them. They prefer the privacy, obviously. And then we’ve got the one
where we’ve placed buce, right here. This has got claro plecos,
LDA08, the dwarf bristlenose. Yeah, so I’m hoping they’re
gonna use that cave as well. I wish I had some well-established ones, but since I’m setting up
the new fish room, I don’t, but these caves do look
quite well, or quite good when they’re covered in plants, so they don’t nearly as
stark as they do right now, but they are great for a breeding room or a fish room, and they’re
super easy and down and dirty, so you can get ’em done quick. But, yeah, ’til next time, you know, leave any comments of stuff you guys wanna see, otherwise, I’ll just keep filming what I’m doing for my fish room. Off, and off she goes.

59 comments on “DIY Aquarium Caves,Fish Caves, Pleco Caves, Dwarf Cichlid Caves. Homemade and Easy.

  1. get a hole saw for for tiles you trippa. if you use one without a mandrill (the drill in the middle) start your hole with one edge of the circular bit contacting the pot, at a 45 degree angle. once it starts to grab straighten up your drill and cut through for a circle done. stops the jumping around he was on about.

  2. Great video, thanks for the explanation about the Super Glue. Please make sure you are warning children against holding a pot with their fingers on the opposite side of the drill, sounds like an emergency room visit, otherwise, thanks!

  3. you pulling that off with a whole saw meant for wood? Or were those masonry bits that are meant for wet drilling

  4. Any reason why you don't drill in the water? Instead of putting in the water and taking it out again repeatedly.

  5. i made 3 today with different size pots and holes came out great. had one mishap but thanks a lot for the vid. one thing I did was take a piece of sandpaper folded it stuck it in the hole and when around for a minute and came out as smooth as a baby's bottom.

  6. not the best option to be drilling into a bucket of water, much easier to have a spray bottle and do it away from the water 🙂

  7. I have a HUGE question! It's not assorted with caves or anything but I was wondering if you knew if betta fish can handle 1 gallon tanks.

  8. I very much appreciate your videos! I bought a terra cotta pot that I want to drill a hole through, just yesterday so this is a handy video to find!

  9. Awesome video. Was wonder if the super glue damages the plant or does it have to be a "special" kind of plant?

  10. Our Website ►
    Our Newsletter ►
    Patreon Support ►

  11. I use the vases and oil warmers with the little hole inside for the votive from the dollar store. My fish love them and they are stoneware. (and cheap) You can even stack them and glue them together for towers. My gouramies and bettas really like those.

  12. Recommend drilling a small pilot to start before using the hole cutter. If the drill bit is sliding everywhere. Use tape in a cross of 2 strips. This will stop the bit sliding. Would recommend slow progress will get the job done without cracking the pot.

Leave a Reply

Your email address will not be published. Required fields are marked *