Claire Corlett

Fish Food, Fish Tanks, and More
iBobber Sonar Fish Finder Tutorial – How to use video

iBobber Sonar Fish Finder Tutorial – How to use video


Now, being able to read the water is a huge advantage as a fishermen. On the surface and lakes and rivers they all look pretty much the same. But its subsurface where it all happens. There’s banks of weed, troughs, gullies, these are all brilliant fish holding spots. And it’s particularly important in summer but imagine what it’s like in winter when the fish really shoaled up. If you could understand what was under the the water you could try and those shoals of fish straight away. Now thanks to some new technology the ibobber, we can now see under water you can find the features and you can find the fish. Let me explain how it works. So what exactly is an iBobber? Well it’s a castable sonar device. So what’s sonar all about? Well it’s the sort of stuff the trawler men used two use years ago and still use it now to check the seabed to find out where the shoals of fish are so they can scoop them up and you can have cod and chips down the chippy. All that technology has now been refined into a tiny little device here is, you can cast it out, you can read the lake bed, you can find where the fish are. It’s amazing technology. Let me show you how you make it work on the bank The first step to start seeing under water and finding your fish is to get the thing powered up. Now it comes with a USB lead you plug it in, there’s a normal plug or into your laptop or computer. Now this Bobber goes into the port, attach it so like that and it does start to glow blue you’ll see it easier obviously if it was a darker room. And you just let it charge, and that charge will stay in the iBobber for up to a month. So its pretty long lasting. Now step 2 of this simple procedure of setting up is to download the app. It’s a free app, and again it’s simple to do from the App Store. You can use it on your mobile phone or indeed a tablet. Now it uses latest technology. It uses Bluetooth 4. Now that means there’s less of a drain than previous models and also it’s less intermittent so you get a more powerful connection. Once the iBobber is charged you need to
sync the two together. So you take it off charge so you just knock it off like that. And then from the app you start to fill in your details. So you’ll put your email address in, your own tagline, mine’s Esox1969 after pike and the year my birth becuase I’m a pike fanatic, and then you’ll be able to start to build your details on your phone and personalise the connection between the two. Now step four, well that’s about getting down the lake or river and giving it a go. What you gotta do is attach this to your rod and reel. You need a fairly strong rod, I use carp rod with a shock leader on it. but you could just use any many powerful-ish rod. It weighs about 2 ounces so it doesn’t want to be something that’s going to break. You cast it out and you start to get the information on your phone or on your tablet. Now the first thing I’m going to show you is mapping the water. Now this is really important like I said before it’s the underwater world, the contours, the gullies, the weed beds, this is where the fish sit, and its a trick I’ve used many times with the iBobber to catch me some big carp, as well as pike and tench. Now all you’ve got to do, this thing switches on when it hits the water. Lay it down, and I’m going to go into the app, into the section marked mapping water. It’s at the top of your screen. You’ll see a little arrow pointing to an underwater map. Click it on, and it tells you to cast out. So let’s flick it out. Now this will map to a hundred feet out, and over hundred feet of water, a hundred and thirty-foot I think as much as. So you cast it out, and you refer to your app and it tells you to start mapping. Press OK. And then start to reel in slowly. Now don’t
do it too fast and nice and steady and slow two feet per second is the default setting but you can change it to suit yourself. Wind in slowly and all the time it’s emitting sonar beams down to the bottom and back again and gathering all that information up. When you’ve got to the edge, go back to your app, and counts down the three seconds and it delivers the map of the lake bed or the riverbed wherever you fishing and
you can start to understand the contours and then where the fish might be living. Now another crucial part of the iBobber is the finding the fish feature. Now this lets you identify where shoals of fish or individual fish are. It will tell you what depth they are lying at so you can choose the kind of rig you need, so if you were carp fishing you could use a ‘zig rig’ up in the water or a bottom bait. Or if you were lure lure fishing you might use crankbait lower down the water or maybe even a surface popper if they were high. So you can understand where they’re sitting in the water column. Also, it will tell you the size of fish. So there’s an orange tag on the fish that says they’re sort of
smaller maybe under 15 inches and a green coloured one that says they’re
bigger. It’s a good indicator to give you sort of a pointer to what you’re after. Another great advantage with iBobber is it can be used at night when the fish are often the most active. By using the status bar you can put the light on inside. So cast it out and you’ll be able to see it. Also on the device in the status bar you’ve got a fish alarm, and that can activate when it goes over a fish. OK so we’ve seen how it works. The best thing now is to stay active I mean the fish aren’t always going to come to you you need to go to them sometimes. So I’m going to wander around find some spots either some spots fish on the water or some nice contours
where I think will be perfect set a trap and put a bait. And I’m gonna sit back and see if it pays off. Well I’ve had a good look around. I’m going to make a few more casts. This looks a nice spot to push your way through here to the
reeds and there’s a bit the tree there. If this had a nice shelf, I could find the drop off and then put a bait there. So I quite fancy this if it looks right underwater. So lets cast out. And of course with these things are hardly makes any splash. So you’re not going to scary anything that’s there there either. Lets have a look. OK, we’ve crept into position. We’ve got a lot of cover here so when I cast out, flick it out. Now, it’s activated because the iBobber is in water. Lets go to the app. Now we’re going to go on underwater mapping and it’s telling me to, 3-2-1 yep. So now I can start retrieving. So I’m going to do two feet per second, something like that. Steady anyway, don’t have to be too precise. Now there’s been no disturbance so whatever is down there isn’t going to be scared off. But you might do if you were using a mark float. That’s it. We’re in. So press it again, and then I’ve got it. An underwater map of the contour here. It’s about two feet and then it drops off down a slope and then steadies away. So it’s the bottom of that slope I want to be because that’s where the fish are going to be patrolling along that so it’s a nice drop off let’s put a trip down there and leave it and see how we go. Lets keep quiet. So there you have it. iBobber really works I’ve used it to catch carp on lakes by positioning bottom baits near shelvs. I’ve used it to catch really big pike in Ireland I’ve just dangled all this thing off the edge of a boat and been able spot the underwater features, and shoals of silverfish. It’s a really great tool and that uses the latest technology so it doesn’t drain
your battery. But the best thing about it is the price. It’s under a hundred pounds. You can’t go wrong.

43 comments on “iBobber Sonar Fish Finder Tutorial – How to use video

  1. You can purchase #iBobber #FishFinder for less than £99 here at Amazon – https://www.amazon.co.uk/dp/B00LEA2FS0. Second Chance Ltd. are the Exclusive distributors for European territories. For more information on distribution please contact us via [email protected]

  2. This product would seem to be extra useful for trout fishing because there harder to locate and catch. It would be nice to see the depth of the trout to know whether to use a bobber or lure on top or fish the bottom. Also do you have to have an iPhone because I have a galaxy s6 edge.

  3. Does it work to use it with a boat And sitting in the boat or use with a baitboat if you make in both situations a modification to be sure that the bobber lay on the water surface?
    (example: a mini rod with a short line)..just ask to be shure it works with my fishing habit 🙂
    Cheers

  4. I understood how I bobber works but also let us know about the automatic fish catcher I mean the device which you have fixed with the rod and it indicates that fish has been caught automatically instead of pulling when it bites the bait…

  5. Does anyone use this as a bobber float with hook and bait attached? Also very misleading when you said battery will last a month. 6 hours more like.

  6. I hav a j3 samsung.the ibobber.isnt connectin.wonce iv brought it in.to 16 meters it connects.is it my phone.thats not good anuff..or is it the bobber.to far.out..tryed it on my freinds phone..it did the same.but close in it worked.but sayin.thers fish half a rod lengh out..not shore if its correct..

  7. wrong colors or wrong places…the part in the water should be white, ths part above the water red or orange etc

  8. Marketing wank. 10 minutres of video and 3 seconds of screen time showing what the app displays on your phone, or doesn't display. PIECE OF CRAP.

  9. So far so good >>>allabout.wiki/4m7o Installation was a breeze and it is so easy to operate. I plugged it in and turned it on. Didn't even read the book on how to use it. Very easy to navigate the menu. Great fish finder for the money and love the gps type tracking feature.

Leave a Reply

Your email address will not be published. Required fields are marked *